EvansStainless steel cutting machines are used for cutting stainless steel. Stainless steel contains 10% to 20% chromium, which tends to destroy the oxidation process due to the presence of chromium. Both iron and chromium in stainless steel undergo an exothermic reaction with oxygen during cutting. The chromium oxide has the property of preventing oxygen from entering the inside of the molten material, and the amount of oxygen entering the molten layer is reduced, the oxidation of the molten layer is incomplete, and the reaction is reduced. Reduce the cutting speed. The most important process parameters affecting the quality of stainless steel cutting are cutting speed, laser power, oxygen pressure and focal length.
Our Factory could provide the followings Methods of cutting stainless steel to meet for customer request, According to customer request to choose different equipment;
1. High pressure water jet waterjet water cutting
2. Step punching
3. Scythe scissors
4. Disc shears
5. Saw
6. Grinding wheel cutting
7. Laser cutting
8. Plasma arc cutting
9. Manual cutting
Wuxi Xiangxin Steel Co. ltd Provide the Inspection before shipping. Our company could provide the PMI , micrometer ,or Metal material analyzer to test the quality, at the same time, Customer also could ask the third party for checking, such as SGS, BV,Sunshine etc.
Please check the chemical composition test method below.
1. Spectrometer
One is to use direct reading spectrometer to detect full elemental analysis, and can detect C element, and the other is X-ray fluorescence spectrometer. This method has fast detection speed, convenient instrument carrying, and accurate detection of components and grades.
2. metal material analyzer
The metal material analyzer is a metal material element analysis system that uses a high-frequency induction furnace with an infrared carbon-sulfur analysis system to quickly and accurately measure carbon steel, high-medium-low alloy steel, raw cast iron, gray cast iron, ductile iron, and alloy cast iron. Determination of elements in various materials such as ferroalloy, ferrosilicon, ferromanganese, ferronickel, ferrochrome, rare earth metals, coke, coal, slag, catalyst, ore. The instrument burns samples through a high-frequency induction furnace, and the content of C and S elements is determined by infrared analysis. Mn, P, Si, Cr, Ni, Mo, Cu, Ti, V, Al, W, Nb are determined by photoelectric colorimetry. The content of elements such as Mg and total rare earth.
0102030405060708
Wuxi Xiangxin Steel.CO.Ltd Could provide the Polishing, Checkered , Color Surface
Color PVD Plating,2B,BA,NO4,NO.1, Mirror Finish, Brushed Finish, Hairline Finish, Embossed and Etched Finish etc. Decorative stainless steel with different cost for customer selection to do the stainless steel sheet, coil, pipes, round bar, channel bar, angle bar, flat bar, etc.
Decorative Surface also could be done as different colors such as Gold, rose gold, black, bronze or copper etc. We can process different designs on the decorative ones for choice by etched or embossing etc.
Most of the architects, designers and DIY-ers Them, which has every quality of stainless - durability, cut-ability - with the beauty of a near flawless surface. Decorative Stainless Steel will not crack, corrode, rust, tarnish, peel or discolor, holding up to indoor and outdoor elements ranging from humidity, cold, salt, soap, rain and sun.
010203040506070809101112
Wearhouse stock
Our company have more than 20 Big wearhouse in China for selling stainless steel coil,pipe,bar,round bar,angle bar,channel bar, etc. At the same time our wearhouse are loaded in Jiangsu , shanxi, Guangzhou, Shanghai, Harbin, Shandong; Our company could save more time to send the customer goods in shortly time;
Our wearhouse goods are all the reqular sizes:
201.202.301.302.304.304L.310S.316.316L.321.430.430A.309S.2205.2507.2520.430.410.440.904L 630 ect. Or Customized.
Sheet / Plate:
Thickness 0.01mm-300mm or customized;
Width:1000mm,1220mm,1250mm,1500mm,1540mm,1800mm,2000mm or customize.
Length:2000mm,1440mm,2500mm,3000mm,6000mm, or customized.
Pipe/Tube
OD 6mm-630mm or customized.
Thickness:0.4-30mm or customized,
Length: 6m or 12m or customerized.
Coil
Thickness 0.01-3.0mm or customized; Width:500-1500mm Customized.
Bars:
Flat bar:
Width 3-500mm;Thickness0.3-120mm;
Length:1000-6000mm(or as your request).
Channel bar:
Width: 50*37mm*4.5-400*104*14.5mm or customized;
Length: 6m,9m,12m or as required.
Angle bar:
Thickness: 3-24 mm or customized.
Type: 2#-20#;Size: 20-200mm;Thickness: 3.0-24mm;Weight: 0.597-71.168kg/m.
Round bar:
OD:5-300mm or customized;
3000mm-12000mm, or as per requirements.
Wires
Wire gauge:0.11mm to 16mm.
Diameter:0.01-10.0mm.
01020304050607080910
- Q: Are you trading company or manufacturer ?
- A: We are Manufacturer and specialized in stainless steel coil, pipe, strip, round bar, angle bar, channel bar, flat bar with kinds of surface finished processes and decoiled/flattened processing.
- Q: How long is your delivery time?
- A: It takes around 3-5 days for the regular models, and 7 to 10 working days for the special sizes and processing. It is based on the order quantity and requirement.
- Q: Do you provide samples ? Is it free or extra ?
- A: Yes, we would send you small samples for free;
- Q: What is your terms of payment ?
-
A: A: 100% T/T advance. ( For small order<$10000.)B: 30% T/T and balance against copy of documents.C: 30% T/T advance, balance L/C at sightD: 30% T/T , balance L/C usanceE: 100% L/C usance.F: 100% L/C at sight.
- Q:What's your MOQ(minimum order quantity)?
- A: Usually for stainless steel product MOQ at least: 1Tons; the product is different, the minimum quantity is different.
- Q: What is the usage of your products?
- A: It is widely used for elevator and kitchen decoration, Luxury door , wall panel and indoor decoration, advertising board, ceiling corridor, hotel hall, storage rack and kinds of entertainment places, etc.
- Q: Do you have any assurance for your stainless steel ?
- A: It will have the mill test for quality and material report for each shipment.